Changing Between User-Defined Mode/Astro Clock Mode Via Sms - Siemens LOGO! 8 Manual

6 Operating the Application

6.3 Changing between user-defined mode/astro clock mode via SMS

No.
4. Use the or
5. Use the curser keys
Note:
When editing the parameters for the time via LOGO! or LOGO! TDE, please note that you
need to leave a blank for the first digit. Value "01724" must therefore be set as the parameter
for time of day "17:24" (see screenshot).
6.
After the changes have been made, you press the ESC button on LOGO! or LOGO! TDE.
7. The parameter has now been changed and a new user-defined time of day (in this case 17:24
h) has been set for switching the street lights.
6.3 Changing between user-defined mode/astro clock
mode via SMS
In order to be able to change the mode via SMS, a trigger must be created in the
LOGO! program (see also Chapter 3.2). Any analog value (at least value "1") must
be written to network block NAI2 here with variable address "8". If, for example,
analog value "2" is written to the analog network block NAI2, a trigger is created
and the mode for switching the street lights changes:
Table 6-3
No.
1. Enter the following text as SMS message:
"SMSwrite;LOGO=VM8,2,WORD".
As soon as the mode has changed, the user is informed via SMS.
LOGO! Set 1
Entry ID: 109063024, V1.0,
keys to move the curser to the parameter you wish to change.
or to change the parameter.
07/2015
Action
Action
25