Visual Inspection - Cisco GS7000 Installation And Operation Manual

Maintenance
Procedure
Indicators
Wiring/Cable Assemblies
Cleaning:
External Surfaces
External Controls/Connectors
Internal Connectors/Circuit Cards

Visual Inspection

Visually inspect the following items.
What to Inspect
Exterior surfaces
Connectors
Wiring and cables
Interval
Semiannually
Annually
Annually
Annually
Annually
How to Inspect
Inspect for:
• dust, dirt, lubricants, or other foreign matter worn spots or deep scratches
on surfaces
• corrosion
• marred protective finish exposing bare metal
• missing, incorrect or obliterated marking, decals, or reference designators
Inspect for:
• broken, loose, bent, corroded, or missing pins
• cracked insulator inserts
Inspect for:
• cuts, nicks, burns, or abrasions
• exposed bare conductors
• sharp bends
• pinched or damaged wires
• broken or loose lacing or clamps
Cisco GS7000 Super High Output Intelligent Node Installation and Operation Guide
Visual Inspection
37