Strand (Aerial) Installation; Pedestal, Service Closet, Equipment Room Or Underground Vault Installation; Connection To Network Power Sources - Cisco GS7000 Installation And Operation Manual

Strand (Aerial) Installation

• Laser Class: Class 1M.
Strand (Aerial) Installation
Caution
Be aware of the size and weight of strand-mounted equipment during the installation operation.
Ensure that the strand can safely support the equipment's weight.

Pedestal, Service Closet, Equipment Room or Underground Vault Installation

Warning
Avoid the possibility of personal injury. Ensure proper handling/lifting techniques are employed when
working in confined spaces with heavy equipment.
• Ensure this equipment is securely fastened to the mounting surface or rack where necessary to protect
• Ensure the mounting surface or rack is appropriately anchored according to manufacturer's specifications.
• Ensure the installation site meets the ventilation requirements given in the equipment's data sheet to
• Ensure the installation site and operating environment is compatible with the equipment's International

Connection to Network Power Sources

Refer to this equipment's specific installation instructions in this manual or in companion manuals in this
series for connection to network ferro-resonant AC power sources.
Unit is intended to be installed, operated and maintained by trained personnel, in accordance with the local
and national regulations.
The unit is intended to be powered from the secondary circuit of an APPROVED/CERTIFIED power
source with adequate isolation (reinforced or double called out in the applicable standard) between mains and
secondary circuit.
Use suitably rated CERTIFIED/APPROVED CATV Cable suitable for outdoor use rated VW-1 or FT-1
or better.
Cisco GS7000 Super High Output Intelligent Node Installation and Operation Guide
x
against damage due to any disturbance and subsequent fall.
avoid the possibility of equipment overheating.
Protection (IP) rating specified in the equipment's data sheet.
Preface