Ordering Information - Cisco GS7000 Installation And Operation Manual

Ordering Information

If the amplifier's 1 GHz output level is 49.0 dBmV with a linear operating tilt of 14.5 dB (from 50 to 1 GHz),
the corresponding output level at 750 MHz would be 45.1 dBmV. This was found by taking the difference in
tilt between 1 GHz and 750 MHz (14.5 – 10.6 = 3.9 dB). Then subtract the difference in tilt from the operating
level (49.0 - 3.9 = 45.1 dBmV).
Ordering Information
Please refer to the iNode Data Sheet for a full listing of the configured node, components, and accessories
that are available.
Please consult with your Account Representative, Customer Service Representative, or System Engineer
Note
to determine the best configuration PID for your particular application.
Cisco GS7000 Super High Output Intelligent Node Installation and Operation Guide
6
General Information