Color Code; Fiber Management System - Cisco GS7000 Installation And Operation Manual

Color Code

Important
Color Code
Fiber connectors and adapters are labeled with the following color code.
This is only a suggested setup. Your fiber assignment may be different. Refer to your network diagrams
Note
to verify your color code.
Connector/Adapter Number
1
2
3
4
5
6
7
8

Fiber Management System

The fiber management system is made up of a fiber tray and a fiber routing track. The fiber tray provides a
convenient location to store excess fiber and up to two WDM modules in the node. The tray is hinged to allow
it to move out of the way during the insertion of the fibers and for installation or replacement of the node
power supplies. The fiber routing track provides a channel for routing fiber pigtails to their appropriate optical
modules as well as a location to snap in unused fiber connectors for storage.
The following illustration shows the design of the fiber tray.
Cisco GS7000 Super High Output Intelligent Node Installation and Operation Guide
22
Fiber optic cable installation is a critical procedure. Incorrect installation can result in severely degraded
node performance. Be sure to carefully follow fiber connector manufacturer's instructions. See
Cleaning of Optical Connectors, on page 42.
Fiber Color Code
Blue
Orange
Green
Brown
Slate
White
Red
Black
Installation
Care and
Connects to
forward receiver 1
forward receiver 2
reverse transmitter 1
reverse transmitter 2
spare
spare
spare
spare