Typical Framing Dims - Right-Sided Corner - DaVinci fireplace Owner's Manual

38
Typical Framing Dims – Right-Sided Corner
Recessing the Back Edge of the Fireplace (Optional)
Installers may wish to recess the back of the fireplace to allow for a more shallow installation, placing the side
glass next to the side wall(s). If you decide to recess the back of the fireplace, make sure to accommodate the
framing and facing dimensions. The back edge of the glass extends to a location 5.75" (147mm) from the back
of the fireplace (see dimensions page for details). Framing for this type of installation may protrude forward
from the back wall of the opening a maximum of 5.25" (134mm) when using ½" (13mm) drywall. Consult the
dimensions page and plan your installation prior to framing the opening.
Version
78" Right Side
90" Right Side
102" Right Side
114" Right Side
126" Right Side
© Travis Industries
Installation
3" (77mm) Maximum for vent clearance. Do not place
vertical framing directly in the center above the fireplace - it
will infringe upon the vent clearance requirements.
20"
508mm
x
Width (x)
79.5" (2020mm)
91.5" (2325mm)
103.5" (2629mm)
115.5" (2934mm)
127.5" (3239mm)
(for qualified installers only)
y
Max. 5.25"
134mm
Height (y) Height (y)
12" Glass 20" Glass
50.625" 58.625"
(1286mm) (1490mm)
4150126
Height (y) Height (y)
30" Glass 36" Glass
68.625" 74.625"
(1744mm) (1896mm)
100-01418