Damper Body Service; 200 Hour Service - SRAM RockShox SIDLuxe 2024+ Service Manual

2 0 0 H o u r S e r v i c e
1
Remove the damper air/nitrogen fill port cap. Depress the Schrader Remove the damper air/nitrogen fill port cap. Depress the Schrader
valve and release all air pressure from the damper. valve and release all air pressure from the damper.
Once the pressure has been released, depress the Schrader valve a Once the pressure has been released, depress the Schrader valve a
second time. If the Schrader valve is able to move, the shock has been second time. If the Schrader valve is able to move, the shock has been
completely depressurized. completely depressurized.
If the Schrader valve does not move at all, the shock is still If the Schrader valve does not move at all, the shock is still
pressurized and will need to be sent to an authorized RockShox pressurized and will need to be sent to an authorized RockShox
dealer for further service. dealer for further service.
⚠ CAUTI ON - EYE HAZARD
Verify all pressure is removed from the shock before proceeding.
Failure to do so can cause the damper body to separate from the
shaft eyelet at a high velocity. Wear safety glasses.
2 Remove the Schrader valve core from the damper air/nitrogen fill port. Remove the Schrader valve core from the damper air/nitrogen fill port.
3 Remove the Bottomless Token, if installed. Remove the Bottomless Token, if installed.
4 Clamp the damper eyelet into the vise. Clamp the damper eyelet into the vise.
D a m p e r B o d y S e r v i c e
Schrader valve tool
Schrader valve tool
2 mm
Small hex
Bottomless Token
36

Damper Body Service