Advanced Programming - Index - King gates STARG8 24 Installation And Use Instructions And Warnings

10.

Advanced programming - Index

The control unit is equipped with advanced programming features which are not required for commissioning the system but
rather for configuring advanced functions:
BACKJUMP CONFIGURATION
- Backjump adjustment
AUX OUTPUT PROGRAMMING
- Programming the transmitter button assigned to the AUX output
- Selecting the device connected to the AUX output
- Selecting the AUX output mode
- Selecting the AUX output voltage
ADVANCED SAFETY DEVICE PROGRAMMING
- Phototest activation/deactivation
- Selecting the outputs assigned to the Phototest
- Selecting the type of edge connected to PHO2
WIRED CONTROL CONFIGURATION
- Selecting the automation control mode (start/pedestrian or open/close)
- Wired activation/deactivation of the start and pedestrian block
OTHER FUNCTIONS
- Activation/deactivation of control unit protection
- Resetting the control unit's factory settings
- Energy saving mode
19