Binary B-200-1CAT-HDIR Owner's Manual page 3

INTRODUCTION
The B-200-1CAT-HDIR extends HDMI over single Cat5e/6 allowing video and audio
transmission. In addition, the B-200-1CAT-HDIR is equipped with bi-directional IR
pass-through allowing users to boost IR control distance up to 200 ft. making
IR control possible with no additional wires. The B-200-1CAT-HDIR also supports
the most advanced 3D video format, which is compliant with HDMI 1.4 3D
specifications, and guarantees the highest 3D video compatibility on the market.
FEATURES
• HDMI 1.4 3D
• Extend the transmission up to 200 ft. from the HDMI source at
HD 1080i or 720p 24-Bit
• Extend the transmission up to 130 ft. from the HDMI source at
Full HD 1080p 24-Bit
• Extend the transmission up to 65 ft. from the HDMI source at
Full HD 1080p 36-Bit
• HDCP 1.1 compliant
• Maximize adjustable 8-level equalization control
• Uncompressed 7.1 channel digital HDMI over Cat5e/6
cable transmission
• DTS-HD Master and Dolby TrueHD audio support
• Supports full frequency IR signal from 20kHz to 60kHz
• Bi-directional IR pass-through
• Wall-mountable housing design for easy installation
Note: The transmission distance is subject to the quality of installed
cable(s), source device, and display. Any keystone jack or other
connections along the transmission path will reduce the transmission
performance significantly. To minimize the chance of EMI,
STP (Shielded Twisted Pair) cable is recommended.