Table of Contents
Advertisement
OPERATING INSTRUCTIONS
The control panel will lock up after 5 seconds of inactivity. Press the MODE button for at least 5
seconds to unlock the control panel.
LCD Backlight On/Off:
To set the LCD backlight to turn off after 20 seconds, press the MODE button until "OPTION BLGT: XX" is
displayed. "XX" represents the current state. Press the UP or DOWN buttons to set the backlight to turn "OFF"
after 20 seconds or "ON" to stay on at all times.
Operating Modes:
The MOD TW100 has seven operating modes:
• CW/WW/Amber Dimmer Mode - Choose one of the three colors to remain static or adjust the intensity of
each color to make your desired color.
• Color Change mode - There are 8 color change modes to choose from. In color change mode the unit will
change through the various colors depending on the color change mode that is chosen. The color change
running speed is adjustable.
• Color Fade mode - There are 8 color fade modes to choose from. In color fade mode the unit will fade
through the various colors depending on the color fade mode that is chosen. The fade running speed is
adjustable.
• Auto Run Mode - In Auto Run Mode, the fixture will run a combination of color change and color fade. The
running speed is adjustable.
• Sound Active mode - The unit will react to sound, chasing through the built in programs. There are 8 sound
active modes.
• Static Color Mode - There are 32 colors to choose from.
• DMX control mode - This function will allow you to control each individual fixtures traits with a standard DMX
512 controller.
DMX Mode:
Operating through a DMX controller gives the user the freedom to create their own programs tailored to their
own individual needs. The MOD TW100 has 5 DMX modes: 3 channel mode, 4 channel mode, 5 channel
mode, 8 channel mode, and 9 channel mode. See pages 10-13 for each modes DMX traits.
1. This function will allow you to control each individual fixture's traits with a standard DMX 512 controller.
2. To run your fixture in DMX mode press the MODE button until "DMX MODE: XXX" is displayed. "XXX"
represents the current displayed DMX address. Use the UP or DOWN buttons to select your desired DMX
address, then press the SETUP button to select your DMX channel mode.
3. Use the UP or DOWN buttons to scroll through the DMX channel modes. The channel modes are listed
below:
• "CHAN: 03" is 3 Channel DMX Mode.
• "CHAN: 04" is 4 Channel DMX Mode.
• "CHAN: 05" is 5 Channel DMX Mode.
• "CHAN: 08" is 8 Channel DMX Mode.
• "CHAN: 09" is 9 Channel DMX Mode.
4. Please see pages 10-13 for DMX values and traits.
5. After you have chosen your desired DMX Channel mode plug in the fixture via the XLR connections to any
standard DMX controller.
A.D.J. Supply Europe B.V. – www.americandj.eu – MOD TW100 Instruction Manual Page 16
Advertisement
Table of Contents
