Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
Cool White/Warm White/Amber Dimmer Mode:
1. Plug the fixture in and press the MODE button until "MANUAL" is displayed. Press the SET UP button to
cycle through the CW/WW/Amber colors.
2. When "CW" is displayed you are in Cool White dimming mode. Use the UP and DOWN buttons to adjust
intensity.
3. When "WW" is displayed you are in Warm White dimming mode. Use the UP and DOWN buttons to adjust
intensity.
4. When "AMBE" is displayed you are in Amber dimming mode. Use the UP and DOWN buttons to adjust
intensity.
5. After you have adjusted the colors to make your desired color you can then activate strobing by pressing the
SET UP button to enter strobing.
6. "STROB" will be displayed, this is strobing mode. The strobing can be adjusted between "00" (strobing off)
to "15" (fastest strobing).
Color Change Mode:
1. Plug the fixture in and press the MODE button until "JUMP RUN SNAP: XX" is displayed. "XX" represents a
number between 01-08.
2. Use the UP and DOWN buttons to find your desired color change mode.
3. Press the SET UP button and "SPEED: XX" will be displayed. Use the UP and DOWN buttons to adjust the
speed of the color change. The speed can be adjusted between "01" (slowest) to "16" (fastest).
Color Fade Mode:
1. Plug the fixture in and press the MODE button until "FADE RUN SNAP: XX" is displayed. "XX" represents a
number between 01-08.
2. Use the UP and DOWN buttons to find your desired color fade mode.
3. Press the SET UP button and "SPEED: XX" will be displayed. Use the UP and DOWN buttons to adjust the
speed of the color fade. The speed can be adjusted between "01" (slowest) to "16" (fastest).
Auto Run Mode:
1. Plug the fixture in and press the MODE button until "AUTO RUN FAD+SNAP" is displayed.
2. Press the SET UP button and "SPEED: XX" will be displayed. Use the UP and DOWN buttons to adjust the
speed of the Auto Run. The speed can be adjusted between "01" (slowest) to "16" (fastest).
Sound Active Mode:
1. Plug the fixture in and press the MODE button until "SOUND PROG: XX" is displayed. "XX" represents a
number between 01-08.
2. Use the UP and DOWN buttons to find your desired sound active program.
3. Press the SET UP button and "SENS: XX" will be displayed. Use the UP and DOWN buttons to adjust the
sound sensitivity. The sensitivity can be adjusted between "00" (least sensitive) to "08" (most sensitive).
Static Color Mode:
1. Plug the fixture in and press the MODE button until "CLR MACS COLOR: XX" is displayed. "XX" represents
a number between 00-32.
2. Use the UP and DOWN buttons to scroll through the 32 colors and find you desired color. After you have
found your desired color you can activate strobing by pressing the SET UP button to enter the strobe mode.
3. "STROB: XX" will be displayed, this is strobe mode. The strobing can be adjusted between "00" (flash off) to
"15" (fastest flash).
A.D.J. Supply Europe B.V. – www.americandj.eu – MOD TW100 Instruction Manual Page 17
Advertisement
Table of Contents
