HOUSING CHANGE
The MOD units housing is interchangeable. You can purchase the white housing kit through ADJ. Changing
the housing is very simple process. Follow the instructions below to change the housing.
For more help contact ADJ Customer Support.
When the screw has been removed and the
safety cable is disconnected you are able to
remove the innards through the top of the
unit.
Start by unscrewing and removing
the bracket knobs.
A.D.J. Supply Europe B.V. – www.americandj.eu – MOD TW100 Instruction Manual Page 22
You are now able to switch shells by carefully lowering the
innards into the new case and reassemble. Reconnect the
safety cable and attach the bracket and knobs.
Once the knobs and bracket have
been removed, unscrew and
remove the safety cable screw.