System Menu - ADJ MOD TWIOO User Instructions

SYSTEM MENU

MENU
DMX MODE
ADDR:001~512
DMX MODE
CHAN:3/4/5/8/9
DMX MODE NO:BLACK
DMX MODE NO:HOLD
DMX MODE NO:AUTO
DMX MODE
NO:MANUA
DMX MODE
DELAY:0~4
SLAVE MODE
MANUAL CW:000~255
MANUAL WW:000~255
MANUAL
AMBE::000~255
MANUAL
STROB:00~15
SOUND PRO:01~08
SOUND SENS:00~08
JUMP RUN
SNAP:01~08
JUMP RUN
SPEED:01~16
FADE RUN
SNAP:01~08
FADE RUN
SPEED:01~16
AUTO RUN FAD+SNAP
AUTO RUN
SPEED:01~16
CLR MACS
COLOR:00~32
CLR MACS
STROB:00~15
OPTION BLGT:ON
OPTION BLGT:OFF
OPTION IR:ON
OPTION IR:OFF
OPTION SYSRESET
A.D.J. Supply Europe B.V. – www.americandj.eu – MOD TW100 Instruction Manual Page 15
Set the DMX starting address
Set the unit DMX channels
When DMX signal is lost or interrupted, the unit will default to BLACKOUT option. It will
switch all LED's off
When DMX signal is lost or interrupted, the unit will default to HOLD option. It will hold the
last state before signal was lost.
When DMX signal is lost or interrupted, the unit will default to AUTO option. It will run the
internal programs.
When DMX signal is lost or interrupted, the unit will default to the manual color setting
Select the unit delay mode
Set the unit into slave mode
Adjust the intensity of the cool white
Adjust the intensity of the warm white
Adjust the intensity of the amber white
Adjust the flash speed,00 is flash off,01 is slowest,15 is fastest
Select the 8 sound active modes
Adjust the sound active sensitivity level,00 is sound active off,01 is the lowest level,8 is
highest level.
Select the 8 color change modes
Adjust the speed of the color change mode
Select the 8 color dreaming modes
Adjust the speed of the color dreaming mode
Select the auto run mode
Adjust the speed of the auto run mode
Select the 32 static colors
Adjust the strobe speed,00 is strobe off,01 is slowest,15 is fastest
LCD backlight always on
LCD backlight will be off after 20 seconds
IR remote function on
IR remote function off
Initialize the unit at the extra factory setting
DESCRIPTION