Test Menu 1: Discrimination Support Function For Improper Connection - Mitsubishi Electric EMU4-FD1-MB User Manual

Test menu 1: Discrimination support function for improper connection

In configuration mode, choose menu "6" to enter test mode. (You cannot enter from setting mode.)
In test mode, the following operations can be possible.
Test menu
SET
(1) Discrimination
support function for
improper connection
Choose the test menu 1.
(As shown in the left figure)
Indicate the phase angle, electric power, voltage and current.
<Example for three-phase 4-wire>
+ / PHASE
Phase angle
(Voltage, phase 1N)
(Note: When voltage and current value is 0, displays " ----°".)
)
SET
+ / PHASE
Phase angle (Current, phase 1)
(Note: When voltage and current value is 0, displays " ----°".)
SET
+ / PHASE
Electric power (phase 1)
SET
+ / PHASE
Voltage (phase 1N)
SET
+ / PHASE
Current (phase 1)
SET
Test menu
*Press to transition to next element from each display.
SET
Phase angle
(Voltage, phase 2N)
Phase angle (Current, phase 1)
Electric power (phase 2)
Voltage (phase 2N)
Current (phase 2)
(35/71)
+ / PHASE
+ / PHASE
Phase angle
(Voltage, phase 3N)
+ / PHASE
+ / PHASE
Phase angle (Current, phase 1)
+ / PHASE
+ / PHASE
Electric power (phase 3)
+ / PHASE
+ / PHASE
Voltage (phase 3N)
+ / PHASE
+ / PHASE
Current (phase 3)