Setting Menu 5: Setting Related To Logging Unit - Mitsubishi Electric EMU4-FD1-MB User Manual

Setting menu 5: Setting related to logging unit

In this menu, set the logging unit ID or logging data clear.
In operating mode, press both
mode and enable the following operations.
Setting menu
SET
DISP
(1) Logging unit ID
SET
DISP
(2) Logging data clear
confirmation
SET
DISP
Setting menu
You should set the setting menu 5 individually.
Caution
You should not set it with other setting menu 1 to 4 at the same time.
The setting requests of logging unit and the setting requests of main unit cannot be accepted at
the same time.
Because the setting of logging unit needs for the setting value of main unit which has already
been completed.
and
SET - / RESET
Choose the setting menu 5
(As shown in the left figure.)
Caution: When the logging module is not connected, the display indicates
"non" (as shown in the right figure) and go back to setting menu
Set the ID number of logging unit.
・Available ID: 1 to 255
Clear the logging data.
no
(Do not clear data)
Complete the setting .
For procedures for setting,
(28/71)
at the same time for more than two seconds to transition to setting
yES
(Clear data)
page 16
("non" indication)