Mitsubishi Electric EMU4-FD1-MB User Manual page 10

(3) Screw mounting (When using the measuring unit and the attachment for panel mounting)
Dimensions of hole panel（76×44.5）
*Panel cut dimensions are made larger than the product considering
tolerance in panel cut.
If you want to prevent dust and other intrusion the gap of panel cut,
cut the panel according to the product to be mounted.
(4) Screw mounting (Measuring unit + optional unit, when using the attachment for panel mounting)
Dimensions of hole panel (101×44.5)
Outline of the option unit
*Panel cut dimensions are made larger than the product considering
tolerance in panel cut.
If you want to prevent dust and other intrusion the gap of panel cut,
cut the panel according to the product to be mounted.
Attaching
Attach the plate by using 2 screws, then install the
Outline of the measuring unit
attachment on the plate.
Tightening torque: 0.63N・m
Attachment for panel
mounting
*Please screw up the panel mounting attachment where there are high
levels of vibration.
*The screws (mounting screws and screws for panel mounting
attachment) are supplied with panel mounting attachment.
Attaching
Attach the plate by using 2 screws, then install the attachment on the
plate (Use the attachment to cut the three points as below).
Outline of the measuring unit
Tightening torque: 0.63N・m
Attachment for panel
mounting
*Please screw up the panel mounting attachment where there are high
levels of vibration.
*The screws (mounting screws and screws for panel mounting
attachment) are supplied with panel mounting attachment.
(9/71)
Mounting screws
Cut off
Mounting screws
Screws for panel
mounting
attachment
Plate
Attachment for
panel mounting
Screws for panel
mounting
attachment
Plate