Harmonic, Operating Time, Etc - Mitsubishi Electric EMU4-FD1-MB User Manual

Setting menu 3: Contact / pulse input/output, equivalent CO
(8) Harmonic voltage
indication
DISP
SET
(9) Operating time
indication
SET
DISP
(10) Counting method of
operating time
DISP
SET
Setting menu
Set whether the harmonic voltage is indicated or not.
oFF on
(Do not indicate) (Indicate)
Set whether the operating time is indicated or not.
(Operating time is integrated while this setting is "oFF".)
on
oFF
(Indicate)
(Do not indicate)
Set the counting method of operating time.
When "A" is selected, operating time is the time integrated while the current measurement.
When "CO.P." is selected, operating time is the time integrated while external input is "ON".
A CO.P.
(By current) (By contact input)
Complete the setting or continue in other menu according to procedures for setting.
For procedures for setting,
(25/71)

, harmonic, operating time, etc.

2
page 16