Chapter 3 Recording Function - Mitsubishi Electric MELSEC iQ-R Series Introduction Manual

3
RECORDING FUNCTION
The recording function stores the devices, labels, and event histories of the CPU module in the recorder module, outputs the
data within the saving period in a recording file when a file saving trigger is established, and saves it in the SD memory card.
CPU module
Device/label
Setting 1
area
Setting 2
: Sampling data
To use the recording function, set the following.
Two recording methods are provided: "File Saving Trigger Only" and "Recording Startup Trigger + File Saving Trigger".
The following table lists the setting example in the recording method using only the file saving trigger for recording data within
the period between 30 seconds before and 5 seconds after the device M0 turns on.
Setting item
Recording setting
Buffer area for
data sampling
Description
Configure the settings required for recording.
■Settings
• Recording Method: File Saving Trigger Only
• Specify Device/Label in batch: Selected
• Device: M0
Recorder module
Recording buffer
File saving trigger
Setting 1
Setting 2
SD memory card
Recording file
Setting 1
Recording file
Setting 2
3 RECORDING FUNCTION
3
8