Making Calls - Unify OpenScape CP600 User Manual

3338
ù
O
Answer O
Incoming call
ù
ë
Thomas Meier
1234954
^
:
or
Line 2
ù
ü
Dial a number...
ù
©
^
:
or
Dial a number...
ø
©
Using the line key on the OpenScape Key Module 600
Prerequisite: A OpenScape Key Module 600 is connected.
Press the flashing key for the secondary line on the OpenScape Key Module 600
£
and use speakerphone mode.
or
Press the Softkey and use speakerphone mode.
_
Line keys without OpenScape Key Module 600
If you have not connected a OpenScape Key Module 600 and lines are config-
ured, calls are only signaled via the display and notification LED.
The phone rings. The caller and the relevant line are displayed. The notification
LED flashes.
Answer the call as described in Section "Incoming calls (

Making calls

You can seize a line before dialing on a MultiLine phone.
Line seizure can be configured on an individual basis. Your administrator
ñ
can determine if the lines on your telephone can be automatically seized
and with which priority.
If you have seized a secondary line, this line is reserved for you for making
calls for a specific period as defined by the administrator. No other user
can seize this line during this period, even if the line is also assigned to this
user's telephone.
Manual line seizure
Dialing using the OpenScape Key Module 600
.
or
Lift the handset or press the speaker key or headset key.
Press the required line key.
_
The input field in Conversations opens.
O
j
Enter the phone number and confirm. You can also search for and use the con-
tact from the conversation list.
Selecting from the Favourites menu
A OpenScape Key Module 600 is not connected, which means that lines are
only accessible via the Favourites menu.
.
or
Lift the handset or press the speaker key or headset key.
The input field in Conversations opens.
O
129
page 65).
