Table of Contents
Advertisement
32
Please enter
PIN:
Making calls – the basic functions
You can use your handset to make both internal and external calls.
Internal calls are calls that
• you make within the range of a communication system, for example, within
your company,
• you make between networked communication systems, for example, to differ-
ent company locations.
External calls are calls that you conduct with users of the public telephone net-
work.
Activating/deactivating the handset
a
Press the on-hook key until the activation or deactivation is confirmed by a sig-
nal.
PIN
If the default PIN has not been changed (0000), the handset is ready for opera-
tion as soon as it is switched on. If a PIN was set, it must be entered before the
handset can be operated.
o
Enter the PIN
[
Confirm your entry. The handset is ready to use.
Displaying the connection quality
The strength of the incoming signal is displayed by the "receive field strength"
icon in on or message status:
|
flashing, no reception
Ò
Low receive field strength
Ñ
50% receive field strength
i
75% receive field strength
Ð
100% receive field strength
The radio range is different indoors and outdoors
your system administrator in the event of range problems.
Charging batteries
You may only use the charging shell provided for the handset.
The handset charges when sitting in the charging shell, even when deactivated.
If the handset is active, the charging status display flashes on the display.
If the handset deactivates because the batteries are flat, it automatically reacti-
vates and is ready for operation as soon as you place it in the charging shell.
The charging operation starts. If a PIN was set, it must be entered first to allow
charging to start.
Making calls – the basic functions
Page 72. Please consult
Advertisement
Table of Contents
