Making Calls; Off-Hook Dialing; On-Hook Dialing; Dialing With The Headset Connected - Unify OpenScape 35 G HFA User Manual

Basic functions

Making calls

Off-hook dialing

^
Lift the handset.
j
Internal calls: Enter the phone number.
External calls: Enter the external code and the phone number
The called party does not answer or is busy:
\
Replace the handset.

On-hook dialing

j
Internal calls: Enter the phone number.
External calls: Enter the external code and the phone number
Your system may also be programmed so that you have to press the
"internal" key before you dial the internal number.
You then do not have to enter an external code to call the external party
(automatic trunk seizure/prime line is not active; consult your
administrator).
The other party answers with speaker:
^
Lift the handset.
or On-hook dialing: Speakerphone mode.
The called party does not answer or is busy:
Speaker Press the key shown. The LED goes out.

Dialing with the headset connected

Prerequisite: The headset is connected.
j
Internal calls: Enter the phone number.
External calls: Enter the external code and the phone number.
Headset The headset key lights up.
The connection is set up as soon as your input is complete
Make sure your headset port is set up properly
1. Pay attention to the notes on voice encryption
1
.
1
.
1
.
Page 107.
Page 63.
25