Safety Precautions - AXIOMTEK rBOX101-FL Series User Manual

Safety Precautions

Before getting started, please read the following important safety
precautions.
1. The rBOX101-FL does not come equipped with an operating
system. An operating system must be loaded first before
installing any software into the computer.
2. Be sure to ground yourself to prevent static charge when
installing the internal components. Use a grounding wrist
strap and place all electronic components in any static-
shielded devices. Most electronic components are sensitive
to static electrical charge.
3. Disconnect the power cord from the rBOX101-FL before
making any installation. Be sure both the system and the
external devices are turned OFF. Sudden surge of power
could ruin sensitive components. Make sure the rBOX101-
FL is properly grounded.
4. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
5. Turn OFF the system power before cleaning. Clean the
system using a cloth only. Do not spray any liquid cleaner
directly onto the screen.
6. Do not leave this equipment in an uncontrolled environment
where the storage temperature is below -45℃ or above 85℃.
It may damage the equipment.
7. Do not open the system's back cover. If opening the cover
for maintenance is a must, only a trained technician is
allowed to do so. Integrated circuits on computer boards are
sensitive to static electricity. To avoid damaging chips from
electrostatic discharge, observe the following precautions:
Before handling a board or integrated circuit, touch an
unpainted portion of the system unit chassis for a few
seconds. This will help to discharge any static electricity
on your body.
When handling boards and components, wear a wrist-
grounding strap, available from most electronic
component stores.
iii