Safety Precautions - AXIOMTEK GOT821A-TGL-WCD User Manual

Safety Precautions

Before getting started, please read the following important safety precautions.
1. The GOT821A-TGL-WCD does not come equipped with an operating system. An
operating system must be loaded first before installing any software into the
computer.
2. Be sure to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and place all electronic components in
any static-shielded devices. Most electronic components are sensitive to stat ic
electrical charge.
3. Disconnect the power cord from the GOT821A-TGL-WCD before any installation.
Be sure both the system and external devices are turned OFF. A sudden surge
of power could ruin sensitive components that the GOT821A-TGL-WCD must be
properly grounded.
4. The brightness of the flat panel display will be getting weaker because of
frequent usage. However, the operating period varies depending on the
application environment.
5. Turn OFF the system power before cleaning. Clean the system using a cloth only.
Do not spray any liquid cleaner directly onto the screen. The GOT821A-TGL-
WCD may come with a touchscreen. Although the touchscreen is chemical
resistant, it is recommended that you spray the liquid cleaner on a cloth first
before wiping the screen. In case your system comes without the touchscreen,
you must follow the same procedure and not spray any cleaner on the flat panel
directly.
6. Avoid using sharp objects to operate the touchscreen. Scratches on the
touchscreen may cause malfunction or internal failure to the touchscreen.
7. The flat panel display is not susceptible to shock or vibration. When assembling
the GOT821A-TGL-WCD, make sure it is securely installed.
Do not open the system's back cover. If opening the cover for maintenance is a
8.
must, only a trained technician can do so. Integrated circuits on computer boards
are sensitive to static electricity. To avoid damaging chips from electrostatic
discharge, observe the following precautions:
➢ Before handling a board or integrated circuit, touch an unpainted portion of
the system unit chassis for a few seconds. This will help to discharge any
static electricity on your body.
➢ When handling boards and components, wear a wrist-grounding strap, available from
most electronic component stores.
Trademarks Acknowledgments
Axiomtek is a trademark of Axiomtek Co.,
Ltd. Intel ® and Pentium Windows 10, ® are registered trademarks of Intel Corporation.
Windows 11 IoT Enterprise, Windows 10 IoT Enterprise are trademarks of Microsoft
Corporation
Other brand names and trademarks are the properties and registered brands of their
respective owners.
iii