Each available wavelength setting allows the output power (laser
light intensity) to be adjusted within the range of approximately -5 to
-12 dBm.
1. Press
to select the maximum output power available for the
selected wavelength.
2. Press
to increase the output power. If maximum value
available already appears on screen, this key will return the light
source to the minimum dBm output for the wavelength and then
increase the output.
3. Press
to decrease the output power. If minimum value
available already appears on screen, this key will return the light
source to the maximum dBm output for the wavelength and
then decrease the output.
In this image,
decrease the output power shown on
Handheld Optical Light Source
Output Power
has been pushed to
page 12.
14