Savant DigiFlow 8000T Manual

Digital filter monitor and flow meter

Table of Contents

Download this manual

Savant DigiFlow 8000T, Digital Filter Monitor and Flow Meter

Features :

Filter capacity life monitor, up to 99500 liters or 19900

gallons

Filter elapse time monitor, up to 720 days

Flow rate display, 0.95 – 13.2 lpm or 0.25 – 3.5 gpm

Near end of filter life alert

End of filter life alert

Battery operated, 2 AAA batteries

Low battery power alert

Automatic data memorized when battery power is off

Application :

Under sink water treatment system

Counter top water treatment system

Commercial water treatment system

Water dispenser

1.0 Electrical :

Operating Voltage : 3 DC Volts

Operating Current : 1.0 mA (work), 0.015 mA (sleep)

2.0 Mechanic :

3.0 Application :

Mounting Method : Back Mount

Flowing Direction : Bi-Direction

Table of Contents

Need help?

Do you have a question about the DigiFlow 8000T and is the answer not in the manual?

Page 1 Savant DigiFlow 8000T, Digital Filter Monitor and Flow Meter Features : Filter capacity life monitor, up to 99500 liters or 19900 gallons Filter elapse time monitor, up to 720 days Flow rate display, 0.95 – 13.2 lpm or 0.25 – 3.5 gpm...
Page 2 5.3 Setting Filter Capacity and Elapse Time Monitor Keep pressing DISPLAY button, then press RESET button and release both of the buttons. The DigiFlow 8000T will go into setting procedure. The digit will blink to notice you that the setting procedure is on.
Page 3 ** The setting procedure will be terminated, and go back to the original status if there is no input for 10 seconds. 5.6 Operating The DigiFlow 8000T will be automatically turn on when there is water flowing through the sensor. It will automatically turn off in 10 seconds when there is no water flowing. 5.7 Mode Selection : Press DISPLAY button is to display the status of the three modes of the DigiFlow 8000T.