Table of Contents
Advertisement
Turning the Light Source On or Off
Turning the Light Source On
1. Insert the battery or connect the power supply unit.
2. Press and hold
activate the laser.
3. The screen display will show a dashed line in the upper right
corner.
Auto Shutdown Function
Press the
key to enable or disable the auto shutdown function.
When selected, "Auto-Off" will appear at the bottom of the screen.
The light source will shut down automatically after 10 minutes idle.
Turning the Light Source Off
Hold down
Handheld Optical Light Source
on the tester. Note that this does not
See page 7 for screen details
to turn off the light source.
10
Advertisement
Table of Contents
Troubleshooting
