Savant Optical Light Source Manual page 39

Com
Selection
6. Software panel will open.
If text appears as non-English characters, select the dropdown
menu on the upper far right and change the language to English.
7. Under the Com Operate menu, select the Com (generally
Com3). If an option does not appear, it indicates that the Power
Meter driver has not installed correctly.
Troubleshooting
• To troubleshoot, fi rst turn off the Power Meter and disconnect from
the computer. Reattached USB cable and turn Power Meter back
on. "Add new hardware" dialog should appear
• If this is unsuccessful, restart computer and attempt the step
above
• Should this not allow connection, attempt reinstalling the software
8. Once Com has been selected, click "Open Com" button
followed by "Connect." "Connect Success" message indicates
successful connection.
Handheld Optical Power Meter
Software Interface
38
Language
Settings