Table of Contents
Advertisement
Prior to attempting to connect the power meter to your
computer, download and install the FTK-FTEST-00 software.
Compatiblity: Windows 7, 10
Connecting the Power Meter
1. With the Power Meter turned off, connect the USB cable to
Power Meter and computer USB port.
2. Turn on Power Meter
3. "Installing device driver software" dialog will appear
automatically.
4. USB-SERIAL CH340 (Com3) will install after approximately 2-3
minutes.
5. Once Power Meter has installed, select SSF-TKITP-400 desktop
icon to open.
Handheld Optical Power Meter
Software Set-Up
Note
37
Advertisement
Table of Contents
Troubleshooting
