Automatic Frequency Detection - Savant Optical Light Source Manual

Automatic Frequency Detection

Automatic Frequency Detection will operate by default when
Automatic Wavelength Identifcation mode is not in use.
1. Connect the light source to its match power meter.
2. On the light source, press
3. Press to select modulation frequency (270Hz, 330Hz,
1KHz, or 2KHz). This will display on the upper right of the
screen.
4. The optical power meter will detect the frequency automatically
and display it on the upper right corner of its screen.
Wave ID Mode and Auto Frequency Detection cannot operate
at the same time.
Handheld Optical Light Source
to activate laser.
Note
16