Savant DigiFlow 8000T User Manual

| Install batteries
Slide off the cover case of the
battery room, and put into 2
AAA batteries. Then slide the
cover case back.
| Setting capacity
and tim ing
Keep pressing | DISPLAY
button, then press |
button and release both of the buttons. The DigiFlow
8000T w ill go into setting procedure. The digit w ill flash
to notice you that the setting procedure is on.
> Setting capacity
Press I W M i lia f l button to choose the
capacity. The sequence is 0 - 100 -
200 - 300...9800 - 9900 - OFF - 0 -
100. Then press is ia a a a button to save
the filter capacity value. Then go into
timing setting.
*The capacity mode will be disabled when you choose OFF.
» Setting tim ing
Press lilb ld f e V l button to choose the tim ing.The
sequence is 0 - 30 - 60 - 9 0...69 0 - 720 - O FF - 0 - 30.
Then press
procedure is com pleted.
*The capacity mode will be disabled when you choose OFF.
*The setting procedure will be terminated, and go back to
RESET
to save the Tim ing. The setting
I®