Installing The Dash Cam - Gazer F715 User Manual

Caution! Degrease the windshield surface before mounting. Make sure
that the mounting location is dry and clean. Do not apply the 3M adhesive
mounting pad if the ambient temperature is below +5 °С. Due to low air
temperature and a significant difference between temperatures inside and
outside the car, 3M tape may lose its adhesive properties and make secure
mounting impossible.
Prior to installation, position the dash cam
accurately on the windshield. Use a felt-tipped
pen to mark the mounting location. Keep in
mind that once the mount is fixed on the
windshield you will not be able to change the
dash cam's horizontal position (right-left) and
only vertical position adjustment (up-down)
will be possible.
Peel off the protective film from 3M tape.
Rotate the dash cam vertically to point its lens
down at about 15°.

Installing the dash cam

Make sure that the dash cam is installed
conveniently. Fix the mount so that other
objects
monitoring indicators on the dash cam front
panel, inserting or removing the memory card,
or pressing any buttons.
Mount the dash cam on the windshield in the
intended spot using 3М adhesive pad.
To remove the 3M mounting pad from the
windshield, use a ruler or plastic card and
push it gently between the mount and the
windshield.
would not prevent
ENG
you from
11