Connecting The Dash Cam - Gazer F715 User Manual

Note:
Gazer F715 dash cam requires direct connection to the car's electrical
system. To install and connect the product without voiding your vehicle
warranty, please contact an authorized service station.
Connect the black wire (GND) to the vehicle's ground. Connect the yellow wire
(BATT +) directly to +12 V car battery terminal or DC +12 V power line. Connect
the red wire (ACC) to the car's +12 V ACC power wire (ACC power turns on when
the car engine starts and turns off when it stops).
When connected this way, the dash cam will turn on automatically and start
recording as soon as the car engine starts. Once the engine is turned off, the
dash cam will continue recording for one hour (default setting) after which the
recording will stop and the dash cam will shut down. You can select the recording
duration and dash cam operating mode after the engine is turned off using "Auto-
off time" and "Parking vibration" settings.

Connecting the dash cam

ENG
9