Turning The Projector On - Christie DHD635-GS User Manual

Turning the projector on

The projector cables must be securely connected before turning the power on.
Warning! Failure to comply with the following could result in death or serious injury.
• Do not look into the projector lens when the laser is on. The bright light may result in permanent
eye damage
1. Connect the projector power cables to AC power.
The Power button on the keypad is illuminated when the power cables are connected.
2. Ensure the lens has been installed in the projector.
3. Ensure that no one or no objects are in the beam path before turning on the projector.
4. To turn on the projector, on the IR remote keypad press
The status LED is orange with a long blink.
5. To select an input source and turn it on, on the IR remote keypad select Input.
Available input sources are VGA, HDMI, DVI, and HDBaseT.
The projector detects the source you selected and displays the image.
The first time the projector is used, select the preferred language from the Main Menu after the
startup screen is displayed.
GS Series 630-635 User Manual
020-001213-02 Rev. 1 (02-2018)
Power on
1 1
or on the built-in keypad press
1 1
Power on
1 1
Input Key
1 2
Installation
.
1 2
22