Christie DHD635-GS User Manual page 41

Menu item Description
PIP-PBP Displays an image with two sources in PIP mode
Settings or PBP mode.
Refer to
PIP/PBP layout and size
Input Key Lists or changes the sources.
Auto Image Forces the projector to reacquire and lock to the
input signal. This is useful when signal quality is
marginal.
Source Info Displays the current source settings. (Read-
only).
GS Series 630-635 User Manual
020-001213-02 Rev. 1 (02-2018)
PIP/PBP Settings menu on page 44 and
on page 46.
Options
• Function—Toggles between displaying two
sources at once (main and PIP/PBP
images) or one source only.
• Main Source—Selects an active input to be
used as the main image.
• Sub Source—Selects an active input to be
used as the PIP/PBP.
• Location—Sets the location of the PIP
image on the screen.
• Size—Selects the PIP size to small,
medium, or large.
• Swap—Changes the main image to PIP/
PBP, and the PIP/PBP to main image.
Swapping is available only when PIP/PBP is
enabled.
• Change Sources
• List all Sources
• Auto Source
• Normal—Supports all of the 4:3 input
sources.
• Wide—Supports all of the 16:9 input source
and most of the 4:3 input source.
For the 4:3 input sources not recognized by
Wide mode (for example, 1400 x 1050),
perform Auto Image using Normal mode.
Operation
41