Telnet Control - CYP CPLUS-V8H8HP Operation Manual

8x8 hdmi 6g matrix with usb extension

Hide thumbs Also See for CPLUS-V8H8HP:

Table of Contents

6.8 Telent Control

Before attempting to use telnet control, please ensure that both the

unit and the PC/Laptop are connected to the same active networks.

To access Telnet in Windows 7, click on the "Start" menu and type

"cmd" in the search field, then press "Enter".

Under Windows XP go to the "Start" menu, click on "Run", type "cmd"

then press "Enter".

Under Mac OS X, go to Go→Applications→Utilities→Terminal

See below for reference.

Once in the CLI (Command Line Interface) type "telnet" followed by

the IP address of the unit and "23", then hit "Enter".

This will connect us to the unit we wish to control. Type "help" to list the

available commands.

Table of Contents

Need help?

Do you have a question about the CPLUS-V8H8HP and is the answer not in the manual?