Rs-232 Command - CYP CPLUS-V8H8HP Operation Manual

6.7 RS-232 Command

Command Name
?
GET FW VER
COMMAND VER
GET MAC ADDR
GET MODEL NAME
GET MODEL TYPE n
SET FACTORY
DEFAULT
SET FACTORY
IPCONFIG
DEFAULT
SET FACTORY OUT
ROUTE DEFAULT
SET POWER B
SET POWER N
SET POWER
STANDBY
SET POWER N
GET POWER
9
Description
Print all available RS-
232/Telnet command
to the screen
Print Firmware version
to the screen
Print command version
screen
to the
Print MAC address
to the screen
Print Model Name to
the screen
Print Model Name
to the screen
Reset unit to factory
default
IP configuration was
reset to factory
defaults(DHCP)
IP configuration was
reset to factory
defaults(DHCP)
Power unit ON/OFF
Power unit ON/OFF
Power unit
Standby
Power unit Standby
Print power unit
ON/OFF/Standby to
the screen
Description of parameter
NONE
NONE
NONE
NONE
NONE
n : 1=matrix, 2=scaler,
3=splitter, 4=repeater
NONE
NONE
NONE
b = on, off
n = 0 - 1 (0-OFF, 1-ON)
b = on, off, standby
n = 0 - 1
(0-OFF, 1-ON, 2-
Standby)
b = on, off, standby