Guidelines For Cleaning Returned Equipment - In-situ Aqua TROLL 500 Operator's Manual

Guidelines for Cleaning Returned Equipment

Please help us protect the health and safety of our employees by cleaning and decontaminating equipment that has been
subjected to potential biological or health hazards, and labeling such equipment. Unfortunately, we cannot service your
equipment without such notification. Please complete and sign the form on page 12 (or a similar statement certifying that the
equipment has been cleaned and decontaminated) and send it to us with each instrument.
• We recommend the glassware cleaning product, Alconox, available from In-Situ and from laboratory supply companies.
• Clean all cables and remove all foreign matter.
• Clean the cable connectors with a clean, dry cloth. Do not submerge the connectors.
• Clean the instrument including the nosecone, cable head, and protective caps.
!
If an instrument is returned to our Service Center for repair or recalibration without a statement that it has been
cleaned and decontaminated, or if it is the opinion of our Service Representatives that the equipment presents a
potential health or biological hazard, we reserve the right to withhold service until proper certification is obtained.
Decontamination & Cleaning Statement
Company Name
Address
City
Instrument Type
Contaminant(s) if known)
Decontamination procedure(s) used
Cleaning verified by
Date
Safety
• Do not submerge the Wireless TROLL Com or your mobile device in liquid.
• Ensure that sensors, or sensor plugs, are completely inserted into the ports, so that no liquid can enter the instrument.
• Ensure that the RDO Sensor Cap is pressed firmly over the sensor lens and is flush with the instrument before
submerging in liquid.
• Replace the cable if insulation or connectors are damaged.
• Make sure the probe and sensor O-rings are clean and free of damage.
1-970-498-1500
State
6
Phone
Serial Number
Title
www.in-situ.com