Using The Ruggedreader In Extreme Temperatures; Cleaning The Ruggedreader - In-situ RuggedReader Operator's Manual

SECTION 7: CARE AND MAINTENANCE
Always make
sure the top cap
is on and the
screws are fitted tightly
before you begin cleaning
your RuggedReader.
TIP: Try to avoid
prolonged direct
exposure to salt
water, mud, or debris.
Rinse the Rugged Reader
in clean running water,
shake or wipe to remove
moisture, especially from
the connectors. Note that
the battery door may trap
water or dirt.
Rugged Reader Operator's Manual
USING THE RUGGEDREADER IN EXTREME
TEMPERATURES
The RuggedReader operates from -22° F to 122° F (-30° C to 50° C). To
help your device function properly, store it device indoors when possible.
Other tips:
• If the RuggedReader is exposed to temperatures below 14° F
(-10°C ), the device may slow down or its display backlight may
become dim to reduce the load on the battery power.
• Extremely low or high temperatures may prevent the battery pack
from charging. Charge the battery pack in temperatures between
32°F and 95°F (0° C and 32° C).

CLEANING THE RUGGEDREADER

CAUTION: Long exposure to the following may damage your device:
· pine oil
· oil-based paint
· automotive brake cleaner
· isopropyl alcohol
· carburetor cleaner
If the device is exposed to one of these, wipe it off with a mild cleaning
solution. After exposure to salt water, rinse in clean water and dry.
Touchscreen
To clean the touchscreen, follow these steps:
1. Press the power button briefly to suspend the device.
2. If you applied a protector to the touchscreen, carefully remove it.
65
0055450 rev. 002 10/07