Guidelines For Cleaning Returned Equipment - In-situ Aqua TROLL 500 Operator's Manual

Guidelines for Cleaning Returned Equipment

Please help us protect the health and safety of our employees by cleaning and decontaminating
equipment that has been subjected to potential biological or health hazards, and labeling such equipment.
Unfortunately, we cannot service your equipment without such notification. Please complete and sign the
form (or a similar statement certifying that the equipment has been cleaned and decontaminated) and send
it to us with each instrument.
1 We recommend cleaning with only mild soaps that are compatible with the product materials.
Wetted materials lists are provided on the product specification sheets. Clean all cables and remove all
foreign matter.
2 Clean the cable connectors with a clean, dry cloth. Do not submerge the connectors.
3 Clean the instrument including the nosecone, cable head, and protective caps.
If an instrument is returned to our Service Center for repair or recalibration without a
statement that it has been cleaned and decontaminated, or if it is the opinion of our Service
Representatives that the equipment presents a potential health or biological hazard, we
reserve the right to withhold service until proper certification is obtained.
Company Name
Address
City
Instrument Type
Contaminant(s) if known)
Decontamination procedure(s) used
Cleaning verified by
Date
1-970-498-1500
Decontamination & Cleaning Statement
State
Phone
Serial Number
Title
8 www.in-situ.com