Connect the instrument to TROLL Com communication device.
1
Remove desiccant from
cable.
Attach the opposite end of
cable to the Wireless
TROLL Com.
Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, HydroVu™, iSitu, Pocket-Situ, RDO,
RuggedCable, RuggedReader, SmarTROLL™, TROLL, VuSitu, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.
rights reserved. This product may be covered by patents identified at www.in-situ.com/patents
1. Aqua TROLL 100 or 200 instrument
2. Rugged Twist-Lock Cable
3. Wireless TROLL Com or USB TROLL Com
4. Bluetooth-enabled mobile device or Windows PC
Getting Started (3 Steps)
Pull textured cable sleeve
back.
Push and twist to lock cable
to communication device.
Aqua TROLL Quickstart Guide
Instrument & Accessories
Press cable into instrument
connector.
Your instrument is now
ready to pair with the VuSitu
mobile app or Win-Situ
software.
Slide textured sleeve
forward. Twist until click.
or
©
. All
0056102 | 1 | 10/2017
Need help?
Do you have a question about the Aqua TROLL and is the answer not in the manual?
Questions and answers