Guidelines For Cleaning Returned Equipment - In-situ Level TROLL 500 Operator's Manual

Guidelines for Cleaning Returned Equipment

Please help us protect the health and safety of our employees by cleaning and decontaminating equipment that has been
subjected to potential biological or health hazards, and labeling such equipment. Unfortunately, we cannot service your
equipment without such notification. Please complete and sign the form on page 78 (or a similar statement certifying that the
equipment has been cleaned and decontaminated) and send it to us with each instrument.
We recommend the glassware cleaning product, Alconox, available from In-Situ and from laboratory supply
l
companies.
Clean all cables and remove all foreign matter.
l
Clean the cable connectors with a clean, dry cloth. Do not submerge the connectors.
l
Clean the instrument including the nosecone, cable head, and protective caps.
l
If an instrument is returned to our Service Center for repair or recalibration without a
statement that it has been cleaned and decontaminated, or if it is the opinion of our
Service Representatives that the equipment presents a potential health or biological
hazard, we reserve the right to withhold service until proper certification is obtained.
1-800-446-7488 77 www.in-situ.com