Level, Depth And Pressure Sensor Specifications; Orp Sensor Specifications; Ph Sensor Specifications - In-situ Aqua TROLL 500 Operator's Manual

Level, Depth and Pressure Sensor Specifications

Accuracy
Range
Resolution
Sensor Type
Response Time
Units of Measure
Methodology
*Typical performance across full temperature and pressure calibrated range. Typical is defined as all values
within 1 standard deviation.

ORP Sensor Specifications

Accuracy
Range
Resolution
Sensor Type
Response Time
Units of Measure
Methodology
*Accuracy from standard at 25° C.
**At thermal equilibrium immediately following calibration, measuring from air to +400 mV

pH Sensor Specifications

Accuracy
Range
Resolution
Sensor Type
1-970-498-1500
Typical ±0.1% full scale (FS)
Non-vented or Vented
9.0 m (30 ft) - Burst: 27 m (90 ft)
30 m (100 ft) - Burst: 40 m (130 ft)
76 m (250 ft) - Burst: 107 m (350 ft)
100 m (325 ft) - Burst:
±0.01% FS or better
Fixed
T63<1s, T90<1s, T95<1s
Pressure: psi, kPa, bar, mbar, mmHg, inHg, cmH
Level: mm, cm, m, in, ft, cmH
Piezoresistive; ceramic
±5.0 mV @ 25° C
±1,400 mV
0.1 mV
Replaceable pH/ORP combo sensor
T63<3s, T90<15s, T95<30s
mV
Std. Methods 2580
±0.1 pH units or better
0 to 14 pH units
0.01 pH unit
Replaceable pH/ORP combo sensor
52
O, inH
2
O, inH O
2 2
www.in-situ.com
O
2