Connecting To Win-Situ On A Pc - In-situ Aqua TROLL 500 Operator's Manual

Connecting to Win-Situ via Bluetooth
!
Download and install Win-Situ by visiting www.in-situ.com. The Wireless TROLL Com must be
connected to the sonde and powered on to connect the instrument to Win-Situ.
Open Win-Situ. Select
Yes when asked to
connect now.
Make sure device is
highlighted in Select
a Bluetooth Device
window and click check
mark button.
1-970-498-1500

Connecting to Win-Situ on a PC

Click Add Bluetooth
Device button.
Click check mark
button on Default
Communication Settings
window to close.
From Devices and
Printers window, click
Add a device.
Click the yellow connect
button at the bottom
right of the screen.
28
Select your Wireless
TROLL Com (PowerPack)
from the list of
Bluetooth-enabled
devices. Click Next.
Click Yes if prompted to
sync device time with
local system.
www.in-situ.com