Command Summary - Omron NL-200 User Manual

Command Configuration

11.2.2 Command Summary

Command Example
AW AW
GT GT1
GR GR
EY EY65,66
VR VR
VL VL1,0,0.5
RS RS2,65
RW RW1,50
RU RU1,75,25
RT RT2,3,4,50
RP RP1,2
RE RE1,3
TT TT1,1ms
KB KB1,23
TR TR2
NOTE: If the above commands are executed using the Web Page feature, they will not be executed
in the command entry area of the Web Page.
11-6
(NL-220, NL-220F)
Effect
Save changes
Enable Ethernet messages
Clear any error condition.
Set webpage password to "AB"
Read the firmware version
Set the rating of channel 1 to 0.5A
Set channel 2 to 65% brightness continuous
Set channel 1 to 50%, switch mode
Set channel 1 to selected mode at 75% and 25%
Set channel 2 to 3ms pulses, delayed by 4ms, at 50% brightness
Output channel 1 is triggered using input 2
Set channel 1 to ignore lighting errors and not prompt for the
current rating of a light when it is connected
Set internal triggers every 1ms
Disable the buttons on the front panel. Set the unlock code to 23.
Trigger channel 2
NL-200 Series Controller User Manual