Table of Contents
Advertisement
Lighting Setup
Note: Voltage Rating is not a suported feature.
Only use Current "Cur" to enter the rating.
7.2 Light Auto-Sensing
When a channel does not have a light connected, the NL-2XX continually tries to put out a very small
current.
When a light is connected, it will flash for a short time (the light will not be damaged by this) until the
NL-2XX detects that it is connected. For voltage rated lights the light is briefly driven at an increasing
current until 100% output is achieved in order to sense the current rating of the light.
7-2
NL-200 Series Controller User Manual
Advertisement
Table of Contents
