10 Web Page
Configuration
(NL-220, NL-220F)
The NL-220 Series has a webserver inside, so that it can be configured from a standard web browser,
such as Internet Explorer.
The IP address of the NL-220 Series must be known (see section 9 on Ethernet Communication.
Open a web browser window and type the IP address (for example 192.168.1.71) of the NL-220 Se-
ries into the URL box at the top. The main page of the NL-220 Series webserver should be shown.
10.1 Main Page
The main page shows general information about the NL220. Links are provided to the configuration pages.
10.2 General Setup Page
The General Configuration page allows the webpage protection password to be set or cleared and
the internal trigger to be set up. Also any Ethernet command from Section 11 can be entered.
"Test Mode" referred to on this page is the internal trigger timer.
10-1
NL-200 Series Controller User Manual