Trigger Inputs; Power Output - Omron NL-200 User Manual

Connections
Pin LED12
1 CH1 lighting
out +ve
2 CH1 lighting
out -ve
3 CH2 lighting
out +ve
4 CH2 lighting
out -ve

5.3 Trigger Inputs

There is one trigger input per channel.
The trigger inputs are opto-isolated 3V to 24V input, drawing a minimum of 3mA.
Pin ET12 connector
1 TRIG1 -ve
2 TRIG1 +ve
3 TRIG2 -ve
4 TRIG2 +ve
5.4 12V Power Output
One or two 12V power supply outputs may be present. These can supply up to 1A at 12V for power-
ing external cameras and other devices. Do not connect inductive loads or devices that take large
peak currents. Do not exceed the current rating as these outputs are not fused.
Pin
1
2
5.4.1 Ethernet Connection (NL220, NL-220F)
The RJ45 Ethernet connector requires a straight through cable to connect into a network switch, hub
or router. It runs at 10Mbits per second.
5-2
PW1 connector
GND
+12V
PW2 connector
GND
+12V
NL-200 Series Controller User Manual