Cold Start - Omron NL-200 User Manual

General Description

6.2 Cold Start

The NL-2XX configuration can be cleared to the default settings, which clears the lighting ratings and
sets all channels to 50% brightness continuous operation. This can be done from the front panel or by
sending the CL command using Ethernet.
To clear the configuration from the front panel, turn on the NL-2XX while holding the SEL and DOWN
buttons, for about 5 seconds, until 'COL' is displayed.. The controller can be cold booted even when
the keypad is locked. The lock is removed by the cold boot.
6-3
NL-200 Series Controller User Manual