Table of Contents
Advertisement
Event messages are sent when a light is connected or an error occurs. The format of these is
Evt<channel>,<event code>;
These event messages are only sent after the GT1 command has been sent.
Event number
1 to 127
128
129
130
131
132
NL-200 Series Controller User Manual
E: Event Codes
Reason
An error has occurred. The error code is given by the event number.
A light has been connected and is working.
A light has been connected but doesn't have a current or voltage rating.
Over temperature error occurred ( FAT)
Over current error occurred (FAC)
An error has occurred while autosensing the rating of a light.
E-1
Advertisement
Table of Contents
