4Wd Switch; 4Wd Switch - Kioti RX6010C Manual

CAuTION
If the hazard lamps are turned

on for an extended period of
time while the engine is stopp-
ed, the battery can be discha-
rged. Therefore, use them only
in emergency.
The hazard lamp can be oper-

ated without the key inserted.
M55-유럽판-04.indd 9

4wD SwITCh

(1) driving mode selection switch
(a) 4wd
the 4wd (4 wheel driving) is to
increase traction by driving four
wheels. it is hydraulically operated
by a simple switch operation.
to e n g a g e t h e 4 w d , p r e s s t h e
switch up. to disengage it, return the
switch.
the 4wd function can be used un-
der the following conditions:
1. if high traction is needed in a wet
area
2. when towing a trailer or using a
loader
description oF operating system
3. when working on a sandy surface
4. when the tractor is pushed out by
reaction from the implement during
cultivating on a hard surface.
5. When cultivating a field or driving
over a bank
CAuTION
To avoid accident:
Engage the switch only when

M55O4L3A
the vehicle is stationary.
while the 4wD is engaged,

d r i v e t h e v e h i c l e w i t h l o w
speed as steering and braking
characteristics may differ.
It is possible to engage the

4wD during driving. however,
you may hear noise or feel
slight shift or impact at times
in this case. For safe driving,
engage the 4wD when the trac-
tor is stationary.
The 4wD should not be used

on a paved road as tires can
be worn faster and could cause
damage to front axle.
4

-
4
2011-08-11 오전 11:58:05